• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door Locks

It isn't easy to replace your door lock. It is essential to protect your home from potential intruders and also to change locks when you get a new housemate or let out your home.

The majority of new locks are made for standard width doors. If your door is more thick, you'll require a "thick-door" kit that comes with longer screws and longer tail pieces for the deadbolt.

Remove the old lock

If you're switching your door lock it is necessary to remove the old lock from the door. You can do this with the help of a few tools, but make sure not to scratch your door or frame. Using the right tools will save you money in future repairs.

Take off the screws that are the trim and handle. This can be accomplished with the help of a screwdriver. Once the screws are removed, you can remove the trim. Then, you will be able to get to the screw that holds the handle and trim to the door. After you have removed the screw and the lock cylinder as well as open the handle.

If you are unable to move your keys inside, it is a sign that the lock is failing. This is due to the tumblers wearing out and eventually stopping their movement upwards or downwards, causing the lock to stop working. If this happens, you'll have to take the lock to a locksmith to be rekeyed.

When you're ready for replacing your deadbolt, start by taking off the screws that hold the faceplate in place. If your kit doesn't include new screws, you should purchase them at a hardware store. If you're installing a mortise locking you'll also have to remove the screws holding the external roseplate to the door. After you've removed the screws, pull the dead bolt and plate away from the door.

Then, search for a hole in the interior trim of the handle. If you find one, slip straightened safety pins into it. You can also try a flat screwdriver against the slot or depression. This should open the lock handle and expose screws which can be removed in order to remove the entire lock from the door.

Installing the new lock

Whether you need to change your lock following a burglary or simply want to change the look of your door, installing an entirely new lock is simple. It is important to measure your door prior purchasing a lock to ensure it fits. This is particularly important for deadbolt locks that require a specific size to fit into the bolt pocket and strike plate. Contact your local hardware store for help when you're not sure what size to use.

If you're replacing mortice locks, use the existing centre rail to guide you in the placement of the new mortise lock. Once you've marked the location of the lock, you'll need to drill holes along the central line of the same size as the lock. Then, you can chisel the wood until you have a neat rectangular space for the mortice lock to fit into. Then, insert the lock and outline the faceplate with the marking knife. Mark and drill screw holes to secure the faceplate into the correct position.

You can save money when making rekeys on replacement upvc window locking mechanism repair locks (look at this web-site) by buying a starter set that includes keys that can be re-keyed and an unlocked key. These kits are available from numerous online retailers and also from hardware and home improvement stores. They also include a set of instructions to assist you in completing the task.

Check your lease agreement if you're renting prior to changing locks. It may require that you provide the landlord with keys to the new lock. If so, you might be required to dismantle the old lock and replace it with a new lock. You can purchase a standard lock at your local hardware store or you can invest in a high-tech lock that connects with your home's WiFI and lets you to lock and unlock your door remotely. The best option is a Schlage Smart Lock, which is compatible with most door knobs and levers. This lock can be connected to an intelligent home security hub to allow you to receive alerts when your door is locked or opened.

Installing a new lock

A broken lock can be a security risk, therefore it is crucial to replace window lock it as quickly as possible. It's simple to replace locks for doors. The first step is to take the lock that was used to secure the door. The screws that hold the lock in place are removed and the lock is pulled out. Depending on the type you have, you may need an Allen wrench or a screwdriver. Keep all the parts of the lock you have lost and put them in a secure location.

Next, install the new lock into the door. Most kits come with a cardboard template showing how the lock will fit to the door. If the template doesn't match up with your door you can trace around the template with a pencil, or use a chisel to take off any extra material. Make sure that the interior latch plate aligns with the mortise opening once the new lock has been installed.

Be careful not to overtighten the lock when installing it. This could cause the lock to crack or even break. If you have a lock that's keyed, make sure the spindle is in alignment with the hole on the knob. If it's not, use the screwdriver to push through the lock into the knob.

After you have completed installing the new lock, you are now able to put in the decorative base plate that is included with it. If the lock isn't equipped with a base plate with a design then you can purchase one that matches the hardware.

Test the new window lock replacement to make sure it is working. This can be done by inserting the lock key and turning the lock so that it is able to open. If this doesn't work, you should call a locksmith.

Rekeying your locks with a professional can also help prevent break-ins. This involves changing the internal lock tumblers to make it unreceptive to your old keys. This will make your home safe and provide you with peace of mind.

Test the new lock

Installing the lock from scratch is a great method to make sure that it functions according to the specifications. This is why it's essential to follow the directions carefully. If you don't, you might not be able to open your door. You can ask a locksmith for assistance if you are unsure of what to do. A locksmith can provide advice on the best locks for your house.

If you're having trouble opening your lock it could be due to an issue with the handle or latch. It is possible to lubricate the latch using graphite or spray it with WD-40. This can help fix the issue. You may have to replace the latch if the latch isn't working correctly.

The lock could have been installed incorrectly. The door handle clip can be broken or gone from the new lock. In this situation, you should grab the handle from inside and insert a plastic retainer clip. After that, connect the handle to the lock and test its operation.

After you've changed the window lock repair, it is important to test the keypad to make sure that it's functioning correctly. You can test the keypad by inserting it into the lock and turning it. If the keypad is working properly, it should unlock and lock your door.

You should also examine the deadbolt lock to see whether it's working properly. If it isn't then you must remove the latch and loosen the Phillips head screws on the side of the door in order to unlatch it. Take out the old deadbolt and replace it with a new one. Be sure to align and load the deadbolt lock in the correct way.

Another method of testing the new lock is to use the spindle test. This can be performed by inserting the spindle with a screwdriver. This test should be conducted prior to reinstalling the lock to avoid any errors.